Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator in the Renault Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side window

See other generations:
Video tutorial

In this tutorial, you will see how to remove the window regulator in the Renault Scenic, an extremely simple and quick operation. First, ensure that the key is not inserted.

Then, disengage both the front half of the support handle and the small cap located inside the opening handle. Next, unscrew all the indicated screws, remove the window regulator console, and separate the panel from the door.

At this point, unscrew the additional fixing bolts, separate the glass from the mechanism, and extract the latter from its housing.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Repair the Window Switch on the Renault Scenic
How to Repair the Window Switch on the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Repairing the window switch on a Renault Scenic may seem difficult, but it can actually be done independently, especially with the help of our video …
Fuse Box of the Renault Scenic
Fuse Box of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) This vehicle has two fuse boxes. The first is located in the engine compartment on the left side near the battery, while the other box is in the cabi…
How to Identify the Fuse Schemes of a Renault Scenic 3
How to Identify the Fuse Schemes of a Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The fuse boxes of a Renault Scenic 3 can be located in two different areas of the vehicle, both inside the cabin and in the engine bay. The fuses loc…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos