Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb in the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Light bulb

In this tutorial, see how to replace the reverse light bulb in the Renault Clio, a very simple and quick operation. First, ensure the key is not in the ignition. Then, open the boot and remove the panel located in the lower left corner. Next, unscrew the single fixing bolt with a 10 mm socket, separate the light from the boot, and remove the old bulb by turning it slightly clockwise. At this point, insert the replacement bulb, avoiding touching the glass with bare hands, and reassemble everything in reverse order.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb of the Rear Light on a Renault Clio
How to Replace the Bulb of the Rear Light on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the bulb of the rear light on a Renault Clio, open the tailgate to access the knob inside the boot, located near the light containing the …
How to Remove the Radio from the Renault Clio
How to Remove the Radio from the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To remove the radio from the Renault Clio 4, use a tool to pry off the trim located at the centre of the dashboard, which surrounds the radio. Once t…
How to Remove the Front Headlight of the Renault Clio
How to Remove the Front Headlight of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Below are the steps that will allow you to remove and replace the front headlight and its bulbs on the Renault Clio, following the instructions provi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos