Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Door trim panel

The rear door panel consists of two elements, an upper and a lower part; to begin disassembly, start by removing the protective caps from the fastening screws located inside the opening handle and inside the window switch housing; once these screws and the window switch panel are removed, detach the upper portion of the panel. Then remove the fastening screws along the lower edge of the other part of the panel and detach this as well, completing the disassembly by disconnecting the connector of the speaker integrated into the panel.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Megane rear interior door panel
Remove the Megane rear interior door panel
Renault Megane (2015-2023 / Megane IV, Megane 4) Replace the door panel? Let's see how the rear door of the Megane is removed from above. We unscrew the tightening screw placed in the space of the i…
How to Remove the Rear Panel on a Renault Megane
How to Remove the Rear Panel on a Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) How to remove the rear panel on a Renault Megane? Do not worry, learn how to proceed. Before starting the disassembly work, disconnect the battery te…
How to remove the door panel of a Renault Megane?
How to remove the door panel of a Renault Megane?
Renault Megane (1995-2003 / Megane 1) So let's start by going to open the front door of our Renault Megane. Once this is done, we will have to proceed by removing the internal opening han…

Other guides you may be interested in

How to Remove the Rear Bumper of the Nissan Qashqai

Removing the rear bumper is straightforward and does not require special precautions other than to detach it gently to avoid damaging the small plastic clips. Once you open the boot, start by removing the screws along the closure line of the boot itself, then move to the edges of the wheel arch to detach and remove the trim of the wing edge. Once the trim is removed, you can access the pin that secures the edge of the bumper to the wing and complete the removal.

Watch the video!


by ScegliAuto

More videos