Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front speaker of the Renault Twingo?

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Speaker

Today's guide will show us step-by-step instructions on how to disassemble and replace the front door speaker of the Renault Twingo. First, we open the front door and start removing the plastic cover of the speaker by prying it on the sides with something thin and pointed. Then, we use a key or a Torx screwdriver to unscrew the two screws of the speaker, disconnecting the electrical connector found on the back to remove it, as shown in the video. At this point, we install the new speaker, making the electrical connection!

Posted on 22 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the dashboard speaker of a Renault Twingo
How to remove the dashboard speaker of a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before starting, we will have to sit in the front passenger seat of our Renault Twino. Let's start by disengaging and removing the top cover of the s…
How to disassemble the front bumper of the Renault Twingo.
How to disassemble the front bumper of the Renault Twingo.
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Below we will see the necessary instructions to disassemble and replace the front bumper of the Renault Twingo. First, lift the car on the front side…
How to disassemble the front headlight of the Renault Twingo
How to disassemble the front headlight of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will discover the instructions that will allow us to disassemble and replace the front headlight of the Renault Twingo. First of all, we ope…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos