Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Headlight

Today we will discover the instructions that will allow us to disassemble and replace the front headlight of the Renault Twingo. First of all, we open the hood of the car and start unscrewing all the fixing screws we find on the top and bottom of the front bumper, including the screws located on both sides of the wheel arches to detach the front bumper; to do this we use a torx screwdriver, as shown in the video. At this point, we unscrew the screws of the headlight group to remove it, disconnecting the electrical connector of the bulbs; replace only the lights or the entire headlight if necessary!

Posted on 5 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Starter Motor on the Renault Twingo
How to Dismantle the Starter Motor on the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Here are the instructions to dismantle and replace the starter motor on the Renault Twingo. First, open the bonnet and start by removing the air filt…
How to Remove the Window Switch Button on Renault Twingo
How to Remove the Window Switch Button on Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) How to remove the window switch button located in the driver’s door panel of a Renault Twingo? This guide explains the procedure; before starting the…
How to Remove the Rear Seat in a Renault Twingo?
How to Remove the Rear Seat in a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, you will see how to remove the rear seat in a Renault Twingo, an extremely simple and quick operation. First, open both rear doors.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos