Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Regulator Motor Replacement

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Power window motor

See other generations:
Video tutorial

For this operation, it is necessary to remove the door cover. Start by unscrewing the screws located in the opening handle area and the window switch compartment.

Use a plastic lever to lift the two compartments and disconnect the connectors of the switches. Next, unscrew all the screws of the cover starting from the bottom.

Remove the speaker grille and unscrew the 4 securing screws, then remove it by disconnecting the respective wires. Remove the plastic cover of the mirror adjustment.

Unscrew the securing screws of the mirror and remove it. Using the plastic lever, gently remove the door cover, being careful with the cables. Unscrew the securing screws of the motor and disconnect the electrical cable.

Remove the complete wiring by detaching the cord from the body via the connector.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Remove the Window Regulator Motor from a Renault Clio
How to Remove the Window Regulator Motor from a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to remove the window regulator motor from a Renault Clio? Do not worry, follow these steps. Before starting the disassembly, disconnect the batte…
How to replace the starter motor on a Renault Clio 1.5 dCi
How to replace the starter motor on a Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …
Repair of Window Regulator Motor
Repair of Window Regulator Motor
Renault Clio (1998-2005 / MK 2, Clio 2) The first operation to perform is the removal of the door panel. Remove the grip cover of the internal handle, under which there are screws to unscre…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos