Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Window Regulator Motor from a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Starter motor

How to remove the window regulator motor from a Renault Clio? Do not worry, follow these steps. Before starting the disassembly, disconnect the battery terminals. Using a Torx screwdriver, unscrew the internal door handle, remove the switch panel with a plastic lever, and unscrew the screws on the panel. Detach the door panel, disconnect the connectors for the window lifters and speakers. Ensure not to lose any of the clips behind the plastic panel that was removed first. Now that the door panel is off, peel back the adhesive cover from the metal and unscrew the window regulator motor with a screwdriver. Replace the part and reassemble everything in reverse order.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will cover the main instructions to dismantle and replace the window regulator motor on a Renault Clio. First, open the front door …
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide, you will see the instructions that will allow you to remove and replace the motor and window regulator mechanism on a Renault Clio. Fi…
Renault Clio (1998-2005 / Clio 2, MK 2) Before you can start, open the front door of your Renault Clio. Begin by unscrewing and removing the Torx screw that secures the window switch with i…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 1998-2005 - Why doesn't the Renault Clio 2 start? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos