Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Display of the Renault Captur?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Car stereo

To remove the centre display of the Renault Captur, detach the leather cover surrounding the gear lever: once this is removed, unscrew the underlying bolts, completely removing the central tunnel panel. When this is detached, locate the securing bolts for the panel with the climate control buttons, detaching this panel as well; now the securing bolts for the centre display will be accessible from both the bottom and the rear. By disconnecting the connectors, the display can be completely removed and replaced with a new one.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Central Navigation System/Display from Renault Captur
Removing the Central Navigation System/Display from Renault Captur
Renault Captur (2013-2019 / MK 1) In today's tutorial, you will learn how to remove the onboard computer from the central instrument panel of a first-generation Renault Captur in simp…
How to remove the car radio of a Renault Captur?
How to remove the car radio of a Renault Captur?
Renault Captur (2013-2019 / MK 1) Good morning, today's guide aims to dismantle the car radio of our Renault Captur. Let's start by sitting in the driver's seat. Then, using a thin bu…
Where is the OBD Port on the 2013 Renault Captur?
Where is the OBD Port on the 2013 Renault Captur?
Renault Captur (2013-2019 / MK 1) The OBD port on the 2013 Renault Captur is easy to access as the manufacturer has installed it in a convenient location. As shown in the video, in th…

    Frequently Asked Questions

    • Captur 2019-2026 - What to do when the touch screen on Renault Captur does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos