Do it yourself
Frequently asked questions about cars and motorcycles

How to perform a service reset on Renault Master 3

Model: Renault Master MK 3 - Years 2010-2023
Part: Warning light – error code

In this brief tutorial video, learn how to perform a service reset on a third-generation Renault Master, produced from 2010 to 2021. As shown in the video, first, turn on the vehicle's instrument panel without starting the engine. Next, press the down arrow button at the end of the stalk until you see "service two" on the information display of the speedometer. To execute the reset, continue holding the down arrow button until the message stops flashing, and the reset will be complete.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Master (2010-2023 / MK 3) Today we will explain how to reset the service light on a 2019 Renault Master vehicle. To reset the light, turn on the instrument panel and then pres…
Renault Master (2010-2023 / MK 3) Today we will explain how to reset the service light of the Renault Master. Before resetting the light, we must perform the maintenance operations su…
Renault Master (2010-2023 / MK 3) After performing the routine service required by the Renault Master, it is necessary to reset the service light, usually orange and shaped like a spa…

    Frequently Asked Questions

    • Master 2010-2023 - Where can I find the unlock code for the Renault Master van's radio? Read answer
    • Master 1997-2010 - Where is the Renault Master 2 radio unlock code? Read answer
    • Master 2010-2023 - How to reset the "service" of a Renault Master? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos