Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Master
    4. : What is the fuse layout of the Renault Master van?

Renault Master - Video tutorial

Model: Renault Master MK 3 - Years 2010-2023
Part: Fuse box
Operation: What is the fuse layout of the Renault Master van?

In this video, we can see the position of the fuse boxes of the Renault Master van and their respective diagrams, useful in case we need to check the fuse of a malfunctioning device. As shown, the first box is located inside the engine compartment, protected by the black cover behind the various liquid trays. The second box is instead located inside the cabin, behind the panel positioned in the lower left area of the dashboard. In case of a blown fuse, make sure to use a replacement with the same specifications and operate with the vehicle turned off.


Posted on 15 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Master 2010-2023 - What is the location of the fuse box in the Renault Master? Read Answer
    • Master 1997-2010 - What is the position of the starter relay in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the indicator relay located in the Renault Master? Read Answer
    • Master 2010-2023 - Where are the fuses located in the Renault Master 3? Read Answer
    • Master 2010-2023 - What is the location of the fuse boxes in the 2021 Renault Master? Read Answer
    • Master 1997-2010 - Where is the cigarette lighter fuse located in the Renault Master? Read Answer
    • Master 2010-2023 - Where is the Renault Master cigarette lighter fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos