Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to test the indicators on the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Instrument cluster

In this video, you can see how to quickly check the functionality of the dial indicators and warning lights on the Renault Kangoo's control panel. No tools are needed, and there is no need to visit a garage. This is something you can do yourself without any issues if you know the secret. Press and hold the button to reset the trip meter. While holding this button, turn on the instrument panel: all the lights will illuminate (you can check if any bulbs are blown), and the needles will move to their maximum positions, verifying their proper operation.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turn signal relay on the Renault Kangoo 1.
How to replace the turn signal relay on the Renault Kangoo 1.
Renault Kangoo (1997-2008 / MK 1, KC, KW) Let's see how to replace the turn signal relay on the Renault Kangoo I: it is located in the internal fuse box, under the steering wheel, on the left…
Where Are the Fuses Located on the Renault Kangoo?
Where Are the Fuses Located on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) The fuse boxes on the Renault Kangoo contain fuses that regulate the operation of various devices. In this type of vehicle, the first fuse box is loc…
Safety Test on Commercial Vans: Renault Kangoo Van 2025
Safety Test on Commercial Vans: Renault Kangoo Van 2025
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) Euro NCAP tested the Renault Kangoo Van in 2025, achieving an overall score of 4 stars out of 5. The lane keeping test was deemed effective; the syst…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos