Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades of the Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Windshield wipers

See other generations:
Video tutorial

When replacing the wiper blades, it is recommended to opt for the AERO model, characterised by a support made entirely of rubber which, due to the flexibility of the material, ensures a perfect fit to the curvature of the windscreen, providing optimal drying results.

Therefore, lift the wiper arm and press the release to detach it, sliding it downwards.

Open the casing of the new wiper, insert it into the corresponding slot of the wiper arm, and press until it locks in place, then close the casing.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Motor on a Renault Clio
How to Replace the Rear Wiper Motor on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this short and simple guide, you will find step-by-step instructions to remove and replace the rear wiper motor on a Renault Clio. First, open the…
How to Replace the Wiper Blades on a Renault Clio 3
How to Replace the Wiper Blades on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Wiper blades on a Renault Clio 3 should be replaced at least once a year because external agents like rain, hail, and humidity can damage them. Malfu…
How to Replace the Wiper Blades on a Renault Clio 4
How to Replace the Wiper Blades on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this short video tutorial, you will learn how to remove and replace the wiper blades on a fourth-generation Renault Clio, by following these simpl…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos