Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the internal door handle on a Renault Clio?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Handle

See other generations:
Video tutorial

In this tutorial, you will see how to replace the internal door handle on a Renault Clio, a very simple and quick operation. First, position yourself on the side where you will be working, then locate the screw inside the handle.

Using a T27 Torx key, unscrew it. If necessary, lever along the joint of the handle to separate it from the door and disconnect the lock release cable. At this point, connect the replacement part, position it in the door, and tighten the fixing screw.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Replace the Internal Handle on a Renault Clio
How to Replace the Internal Handle on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you begin, open the door of your Citroen C3. Start by unscrewing and removing the Torx screw that secures the internal handle. Next, pull the …
How to Remove the Internal Handle of the Renault Clio
How to Remove the Internal Handle of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Having issues with the internal handle of the door on your Renault Clio? Here’s how to remove it. Get a screwdriver and start unscrewing the screw lo…
Replacing the Door Lock and Handle on a Renault Clio 3
Replacing the Door Lock and Handle on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will discover how to remove and replace the external door handle along with the driver’s side lock on a Renault Clio third series. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos