Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Renault Trafic alternator

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Alternator

Below we will see the main instructions on how to disassemble and replace the alternator of the Renault Trafic, as well as the Opel Vivaro. First, we open the engine hood of our car and start removing the front bumper by unscrewing all the fastening screws; then we proceed to disconnect and remove the alternator belt by loosening the tensioner, as shown in the video. At this point, we use a socket wrench to unscrew the alternator bolts, disconnect the electrical wiring to remove it and replace it with the new one, as well as with the original one.

Posted on 12 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Renault Trafic alternator
How to remove the Renault Trafic alternator
Renault Trafic (2001-2014 / MK 2) The guide shows how to replace the Renault Trafic alternator. With a Torx wrench it is necessary to unscrew the two fixing screws of the bumper, loca…
How to disassemble and reassemble the Renault Trafic alternator
How to disassemble and reassemble the Renault Trafic alternator
Renault Trafic (2001-2014 / MK 2) To disassemble the alternator of our Renault Trafic vehicle, we can proceed as follows: Get the necessary material to disassemble and reassemble all …
How to replace the alternator on Renault Trafic
How to replace the alternator on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Wait for the engine to cool down. To avoid possible short circuits, disconnect the positive battery cable before working. Let's start drawing on a sh…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos