Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Locating the EOBD Port on a Renault Captur MK1

Model: Renault Captur MK 1 - Years 2013-2019
Part: Checks and maintenance

In this video, you will see where the EOBD (European On Board Diagnostic) port is located on the Renault Captur MK1. This port is essential for professionals to diagnose vehicle issues using professional diagnostic equipment, but DIY enthusiasts can also benefit from a simple OBD11 device, costing just a few dozen pounds, which will help read the errors stored in the ECU. You will find the EOBD port on the centre console, under the rubber mat where you usually place your mobile phone or other small items.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the EOBD port located on the 2018 Renault Captur?
Where is the EOBD port located on the 2018 Renault Captur?
Renault Captur (2013-2019 / MK 1) Owners of Renault Captur cars may have wondered where the EOBD port of their vehicle is located. Fortunately, this is very easy to locate and can als…
Where is the OBD Port on the 2013 Renault Captur?
Where is the OBD Port on the 2013 Renault Captur?
Renault Captur (2013-2019 / MK 1) The OBD port on the 2013 Renault Captur is easy to access as the manufacturer has installed it in a convenient location. As shown in the video, in th…
Where is the OBD Port on a 2014 Renault Captur?
Where is the OBD Port on a 2014 Renault Captur?
Renault Captur (2013-2019 / MK 1) To easily find the OBD port inside the cabin of your first-generation Renault Captur (2014), follow the procedure described in this guide. First, get…

    Frequently Asked Questions

    • Captur 2013-2019 - What to do if the Renault Captur speedometer does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos