Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Replacement of the air filter for the Renault Megane.

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Air filter
Operation: Replacement of the air filter for the Renault Megane.

Replacing the air filter that feeds the injection system of the Renault Megane is an important operation that allows the engine to breathe better and control fuel consumption. To change it, we open the hood of the engine compartment, unscrew the screw that locks the intake pipe to the manifold, remove the manifold, disconnect the vent tube, unscrew the two bolts that secure the filter box cover. We remove the cover, remove the old filter element, clean the seat, and install the new filter. We put the cover back in place and secure it with its screws. We insert the vent tube, put the manifold back in place, insert the intake pipe, and secure it with the screws.


Posted on 28 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2002-2010 - Where is the air filter located in the 2003 Renault Megane 2 1.6 16v? Read Answer
    • Megane 2002-2010 - Where is the Renault Megane Mk2 1.9 dCi engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos