Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the brakes on the Renault Scenic 3

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Brake pads
Operation: How to replace the brakes on the Renault Scenic 3

To replace the front brake pads, it is advisable to lift the car on a lift to work more easily (if you lift with a jack, apply a safety stand); once the car has been raised, remove the front wheel, release the external spring on the caliper, remove the protective caps from the calliper fixing pins and unscrew the pins themselves; once the caliper has been removed from the support, remove the old pads, retract the caliper cylinder and apply the new pads, fix the caliper to the support with the pins and apply the external spring before reassembling the wheel.


Posted on 15 September 2023 by ScegliAuto



Where is the OBD port located in the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you want to quickly locate the OBD port of your Renault Scenic Mk3, all you have to do is carefully follow the instructions described in this new
Where is the OBD port located on the Renault Scenic 2012?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) If you own a 2012 Renault Scenic and are wondering where the OBD port is located, all you need to do is carefully read the following instructions and
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before we can start, we will have to go and open the front hood of our Renault Scenic. So let's start by extracting the burnt out bulb from its housi

    Frequently Asked Questions

    • Scenic 2003-2009 - How much does it cost to change brake pads on the Renault Scenic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos