Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Tire pressure warning light

When the TPMS light comes on, it is necessary to adjust the tyre pressure. After that, you can proceed to reset the light. To reset it on a Renault Megane 4, do the following: - Turn on the vehicle's ignition; - Press the Menu button located on the right side of the steering wheel; - Scroll through the Menu to select "TYRE PRESSURE"; - Hold the button until the light turns off; Complete the reset by switching off and restarting the ignition immediately after to confirm the TPMS light reset. If the light does not turn off, take the vehicle to a workshop for inspection.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Renault Megane 4
How to Reset the TPMS Light on a Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) Today, you will learn how to independently reset the TPMS light, which monitors the tyre pressure on the Renault Megane MK4, produced from 2015 to 20…
How to Reset the TPMS Light on a Renault Megane IV
How to Reset the TPMS Light on a Renault Megane IV
Renault Megane (2015-2023 / Megane 4, Megane IV) Before resetting the TPMS light on a Renault Mégane IV, it is necessary to check the operation of the tyre pressure sensors; if they are malfunctioni…
How to reset the tire pressure warning light on the Renault Megane
How to reset the tire pressure warning light on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) These short and simple steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Megane; before performing the res…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos