Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Renault Master 3

Model: Renault Master MK 3 - Years 2010-2023
Part: Checks and maintenance

This short video tutorial illustrates the procedure to reset the maintenance light on the Renault Master 3. It is advisable to perform this procedure only after carrying out the vehicle service if the light remains on. To reset it, simply start the instrument panel; once the instrument panel is on, the maintenance light will appear. At this point, press the down arrow button located on the side of the wiper lever and hold it for a few seconds until the reset is completed, which is when the light stops flashing, indicating 40,000 kilometres.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Renault Master
How to Reset the Maintenance Light on the Renault Master
Renault Master (2010-2023 / MK 3) In this article, we will discuss the procedure to reset the service light on the 2020 Renault Master. It is recommended to perform this procedure onl…
How to recover the unlock code for the Renault Master van's radio?
How to recover the unlock code for the Renault Master van's radio?
Renault Master (2010-2023 / MK 3) In this tutorial, we can see how to retrieve the unlock code for the Renault Master van's radio, which must be entered, for example, after replacing …
How to Reset the Service Reminder on a Renault Master
How to Reset the Service Reminder on a Renault Master
Renault Master (1997-2010 / MK 2) This tutorial shows how to reset the service reminder on a Renault Master by following a few simple steps to manage the vehicle independently. First,…

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos