Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2007 Kangoo

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Warning light – error code

See other generations:
Video tutorial

This video shows the procedure to reset the maintenance light on the Renault Kangoo 1st series. It is recommended to perform this procedure only after completing the service.

To carry out this procedure, first, turn on the instrument panel without starting the engine. Once the instrument panel is on, press and hold the reset button located in the centre of the instrument panel for 10 seconds.

When the light starts to flash, release the button and press it again to reset the light. At this point, the reset will be successful.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) To reset the Service light on the Renault Kangoo, press the accelerator pedal throughout the process while the instrument cluster is off: at this poi…
How to reset the service light on a 2012 Renault Kangoo
How to reset the service light on a 2012 Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will explain how to reset the service light on a 2012 Renault Kangoo vehicle independently. To reset the light, we need to turn on the instr…
How do you reset the Service light on the Renault Kangoo?
How do you reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to completely reset the Service light of the Renault Kangoo by inserting the ignition key into the corresponding slot, in order t…

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos