Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Service warning light

To reset the Service light on the Renault Kangoo, press the accelerator pedal throughout the process while the instrument cluster is off: at this point, insert the ignition key and turn it to switch on the cluster. Once it is on, press the brake pedal three times in quick succession, then turn the key back to switch off the cluster. This will allow you to turn the cluster back on to verify that the Service light has been reset correctly.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Kangoo
How to reset the service light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Resetting the service light, related to the car service, of the Renault Kangoo is an operation that follows simple and brief steps. The steps to be p…
How do you reset the Service light on the Renault Kangoo?
How do you reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to completely reset the Service light of the Renault Kangoo by inserting the ignition key into the corresponding slot, in order t…
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, press the button located at the end of the lever on the right side of the steering wheel, after tur…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos