Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuel filter

See other generations:
Video tutorial

Place your vehicle on axle stands to lift it up, as the fuel filter is located near the fuel tank. Disconnect the hose from the side with a small ridge; don't worry about the small amount of fluid that will spill out. Now disconnect the hose from the other side.

You can then remove the filter by unscrewing the clip that holds it in place. Finally, insert the new filter in the same position as the old one, ensuring it is oriented correctly, and reconnect the hoses to their respective fittings.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on the Renault Twingo?
How to replace the starter motor on the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the starter motor on the Renault Twingo, open the bonnet to access the components located inside the engine compartment: here you will fin…
Where Are the Fuses in the Renault Twingo?
Where Are the Fuses in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) The fuse boxes in the Renault Twingo contain the fuses that control the operation of the devices installed in the car: this type of vehicle has a sin…
How to Replace the Battery in a Renault Twingo
How to Replace the Battery in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the battery in a Renault Twingo, open the bonnet to access the components in the engine bay. On the left side, locate the battery, connect…

    Frequently Asked Questions

    • Twingo 2007-2014 - Where is the fuel filter located on the Renault Twingo II? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos