Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Front Fog Lights on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fog lights

See other generations:
Video tutorial

Today, you will learn the instructions to install the front fog lights on a Renault Kangoo in simple steps. First, remove the front bumper by unscrewing all the fixing screws, then position the fog light units in the designated mounts.

Next, route the wiring harness to connect to the battery supply, as shown in the video. At this point, check the operation of the front fog lights, adjusting the beam if necessary, following the video tutorial to the end!


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How do you replace the rear fog light on a Renault Kangoo?
How do you replace the rear fog light on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) It will be possible to replace the rear fog light of the Renault Kangoo by opening the rear hatch, allowing the screws that secure the headlight asse…
How to Dismantle the Rear Fog Light on the Renault Kangoo
How to Dismantle the Rear Fog Light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's information will show you how to dismantle and replace the bulb of the rear fog light on the Renault Kangoo. First, move to the back of the v…
Where are the Fuses Located on a Renault Kangoo?
Where are the Fuses Located on a Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) To manage the operation of the devices present on the Renault Kangoo, it will be necessary to locate the appropriate fuse boxes that contain the fuse…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos