Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Renault Megane, open the bonnet to access the screws securing the headlight unit in place: by loosening these screws, you can detach the headlamp from its housing and disconnect the connector located inside. This will give you access to the bulb inside, allowing you to remove it and replace it with a new one; after replacement, reconnect the connector and secure the headlamp with the screws.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the 2014 Renault Megane
How to replace the front headlight bulb of the 2014 Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the headlight bulb of a 2014 Renault Megane, it is necessary to remove the headlight. Therefore, we open the front hood and using a torque…
How to Replace the Front Headlight Bulb on a Renault Megane
How to Replace the Front Headlight Bulb on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Before you start, open the bonnet of your Renault Megane. Begin by unscrewing and removing the rear cover of the front headlight bulb. This will give…
How to Replace the Front Headlight Bulb on a Renault Megane 3?
How to Replace the Front Headlight Bulb on a Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the front headlight bulb on a Renault Megane 3, open the bonnet to access the engine bay and lower the lever located at the back of the he…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos