Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Cabin air filter

Obtain a pollen filter of the same model as the original. The pollen filter purifies the air in the cabin and is located in the engine compartment under the windscreen. To access it, remove the cover using a plastic tool to pry at the edges. Lift the cover to remove it. Once the filter cover is off, use a socket to unscrew the bottom of the filter, then carefully pull the filter out of its housing to avoid dust dispersal. Place a cloth at the bottom to catch any dirt. Insert the new filter into the housing, ensuring it is positioned correctly, and replace the cover with the screw and the covering.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) The cabin air filter is located on the passenger side, just below the windscreen: open the front bonnet, pull the seal from the rear edge, unclip the…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen: first, remove the seal on the edge, then…
How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos