Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Renault Megane

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Side mirror

Today we will see step by step instructions on how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front door of the car and start levering the triangular plastic cover of the mirror to remove it; now we unscrew the fixing screws of the rearview mirror, disconnecting the electrical connector to remove it from the outside, as shown in the video. At this point, we install and properly fix the new external rearview mirror, finally adjusting the glass!

Posted on 31 March 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Renault Megane?
How to replace the external rearview mirror of the Renault Megane?
Renault Megane (2002-2010 / Megane 2) Below we will see the necessary steps on how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front …
Replacing the External Rear-View Mirror of a Renault Megane
Replacing the External Rear-View Mirror of a Renault Megane
Renault Megane (2002-2010 / Megane 2) The steps in this guide will allow you to remove and replace the external rear-view mirror of a Renault Megane. First, get inside the vehicle and sta…
How to disassemble and install the external rearview mirror of the Renault Megane
How to disassemble and install the external rearview mirror of the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) Today's steps will show us how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front door and start…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos