Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005 As a first step it will be necessary to remove the door panel in question in order to have access to the glass to be removed. To remove the panel it will therefore be necessary to remove all the screws that are hidden behind the various panels located in the middle and around the door, but you can still find a practical guide here in the list of our site to perform all the replacement. Once the panel has been removed and all the pins on the back have been connected, you can proceed to extract the glass by simply unhooking it from the lower guide of the window regulator, remove it from the upper part and retrace the steps backwards for reassembly. How to replace the window glass of the Renault Clio.
Posted on 24 September 2023 by ScegliAuto
Replacement exterior mirror glass on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video tutorial we will see the instructions to be able to remove and replace the glass of the exterior mirror on a Renault Clio fourth series
How to remove the internal door panel of a Renault Clio III to repair the window lifter
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we see how to disassemble the interior part of the door of a Renault Clio III and repair the sliding of the front window. The YouTuber
Guide to replacing the rear side glass of the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will see the main instructions useful for disassembling and replacing the rear side glass of the Renault Clio. First, we open the r Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |