Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the door panel in the Renault Scenic?

Model: Renault Scenic MK IV, MK 4, Scenic IV, Scenic 4 - Years 2016-2022
Part: Door trim panel

In this tutorial we can see how to disassemble the door panel in the Renault Scenic, an extremely simple and quick operation. First of all, we open the door in which we will work, then, using a small flat-tip screwdriver, we remove the two small plastic caps indicated. We then unscrew the screws just released with a Torx key, disconnect the power connector and remove the power window console. At this point we can unscrew the last screws, pry along the perimeter of the panel and separate it from the door.

Posted on 19 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove and replace the exterior rearview mirror of the Renault Scenic.
How to remove and replace the exterior rearview mirror of the Renault Scenic.
Renault Scenic (2016-2022 / MK IV, MK 4, Scenic IV, Scenic 4) Briefly, we will see the instructions on how to dismantle and replace the external rearview mirror of the Renault Scenic. First, let's open the front…
Disassembly of the door panel of the Renault Scenic
Disassembly of the door panel of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) In simple and short steps, we will see how to disassemble and replace the front door panel of the Renault Scenic. First of all, open the front door o…
How do you remove the rear door panel of the Renault Grand Scenic 3?
How do you remove the rear door panel of the Renault Grand Scenic 3?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Let's clarify a detail: the vehicle used to make the video is a Renault Scenic 2, but the procedure mentioned is identical to that of the Renault Sce…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos