Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the mirror regulator switch in the Renault Koleos?

Model: Renault Koleos MK 1 - Years 2008-2015
Part: Side mirror

In this tutorial we can see how to replace the switch of the rearview mirror regulator in the Renault Koleos, a very simple and quick operation. First of all, go inside the cabin on the side where we will work, then, using a plastic spatula to avoid leaving marks, unclip both the switch and the handle cover. Next, disconnect the power connector, separate the switch from the base and insert the replacement. To reassemble everything, simply follow the reverse procedure.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the exterior rearview mirror of the Renault Koleos?
How do you remove the exterior rearview mirror of the Renault Koleos?
Renault Koleos (2016-2024 / MK 2) A job like the one described in the subject and visible in the video can easily fall under DIY operations; it does not present significant difficulti…
How to deactivate the passenger airbag in the Renault Koleos?
How to deactivate the passenger airbag in the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) In this tutorial we can see how to deactivate the passenger airbag in the Renault Koleos, an extremely simple and quick operation, which must be carr…
How to replace the rear brake pads of the Renault Koleos
How to replace the rear brake pads of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Following the instructions in this guide, we will see how to disassemble and replace the rear brake pads of the Renault Koleos. First of all, lift th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos