Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle of a Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Handle

Video tutorial

To remove the external handle of a Renault Kadjar, start by removing the door panel. First, ensure you have the necessary tools, such as screwdrivers and plastic trim removal tools.

Open the door and locate the screws securing the panel, usually hidden under covers or behind the internal handles. Carefully remove these screws, then use a plastic tool to pry at the edges of the panel, releasing it from the clips holding it in place.

Once the panel is removed, you will have access to the inside of the door. Find the bolts and screws securing the external handle and unscrew them.

Additionally, disconnect any electrical connector attached to the handle, if present. Now you can gently pull the external handle away from the door.

Follow these steps carefully to avoid damaging the door components or the handle itself.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on a Renault Kadjar
How to Remove the Gear Knob on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you begin, sit in the driver's seat of your Renault Kadjar. Start by prising off and removing the upper section of the gear knob, then repeat …
How to replace the rear windshield wiper of the Renault Kadjar
How to replace the rear windshield wiper of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) If you don't know how to properly replace the rear windshield wiper of your Renault Kadjar, don't worry because below you will find a description of …
How to Remove the Front Door Panel on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you can begin, open the door of your Renault Kadjar. Start by unclipping and removing the cover near the wing mirror. Then, unclip the window …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos