Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Handle

Video tutorial

We will briefly go through the necessary steps to remove and replace the external door handle of the Renault Kadjar. First, open the front door and start by unscrewing the side fixing screw of the handle using a key or Torx screwdriver; then remove the triangular plastic cover, followed by the entire handle, as illustrated in the video.

At this point, replace and install the new external door handle; secure it properly with the side screw, then check the operation of the door opening!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Replacing the Outer Door Handle on the Front Door of the Renault Kadjar
Replacing the Outer Door Handle on the Front Door of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) By following these brief and simple steps, you will discover how to remove and replace the outer door handle on the front door of the Renault Kadjar.…
How to Remove the Outer Door Handle of the Renault Kadjar
How to Remove the Outer Door Handle of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) This video shows the instructions on how to remove and replace the outer door handle of the Renault Kadjar in simple and quick steps. First, open the…
How to Dismantle the Internal Door Handle on a Renault Kadjar
How to Dismantle the Internal Door Handle on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) How do you dismantle the internal door handle on the driver’s side of a Renault Kadjar? Let’s see how to proceed: disconnect the battery terminals lo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos