Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats in the Renault Zoe?

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Rear bench seat

In this tutorial we can see how to remove the rear seats in the Renault Zoe, an extremely simple and quick operation. First of all, we open both the trunk door and both rear doors, then we lower the backrest by operating the respective levers on it. We then move to the left side, locate the indicated pin, and, using a screwdriver with a flat tip, lever it off the support. At this point, we can remove the backrest from the cabin, separate the seat from the base, and install any replacement by following the reverse procedure.

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the rear seats of the Renault Zoe
Guide to disassembling the rear seats of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and remove the rear seats of the Renault Zoe, in simple and quick steps…
How to Remove the Rear Window of a Renault Zoe
How to Remove the Rear Window of a Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this guide, see the steps that will allow you to remove and replace the rear window and the window regulator motor of the Renault Zoe. First, open…
How to remove the driver's seat in the Renault Zoe?
How to remove the driver's seat in the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) In this tutorial we can see how to disassemble the driver's seat in the Renault Zoe, an extremely simple and fast operation. Before doing this, we op…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos