|
Do it yourself
| |||
| ||||
How to Change the Cabin Filter on a Renault Megane 3
Model: Renault Megane
Megane III, Megane 3
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
This article explains how to change the cabin air filter on the Renault Megane 3. You will need a Torx T20 screwdriver and a flathead screwdriver for this operation. To replace the filter, remove the side plastic cover on the passenger side using the flathead screwdriver. Once the cover is removed, disconnect the airbag connector and fully remove it. After removing the side cover, you need to remove the cover above the glove compartment, also using the flathead screwdriver. Then, remove the 6 Torx T20 screws securing the glove compartment. Once the screws are removed, take out the glove compartment. At this point, remove the side plastic cover as shown in the tutorial video using the flathead screwdriver. Once removed, take out the 2 Torx T20 screws securing the filter cover. After removing these, you can lift off the cover and access the filter. Now, remove the filter, replace it, and reinsert all the covers and screws previously removed.
Updated on 13 October 2026 by ScegliAuto
Related tutorials
Renault Megane
(2002-2010 /
Megane 2)
If it is time to replace the cabin air filter in your Renault Megane Mk2, but you do not know how to perform this operation, read the following guide…
Renault Megane
(2002-2010 /
Megane 2)
In this video tutorial, you will learn how to replace the cabin filter on the second series Renault Megane. First, get inside the vehicle and remove …
Renault Megane
(2008-2015 /
Megane III, Megane 3)
To replace the cabin filter on a Renault Megane, open the glove compartment on the passenger side to access the screws on the top and right side. Onc…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.099
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |