Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the 2013 Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Service warning light

In this video we see how to reset the Service light on the Renault Kangoo 2013. It goes without saying that maintenance should be performed before proceeding with this reset, such as changing the engine oil, air and oil filters, timing belt, when necessary, and so on. Here is the sequence to follow: Turn on the instrument panel, press the button below the odometer and access the Settings, then follow the instructions provided step by step as you make choices until you reach the Full Service option, which should be confirmed by pressing the Ok button.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, insert the key and turn it to power on the instrument panel. Once powered on, navigate through the …
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this short and simple guide, you will learn the main steps to reset and clear the service light that appears on the instrument cluster of the firs…
Renault Kangoo (2007-2021 / MK 2, FC, FW) Resetting the service light on a Renault Kangoo MK2 is a very simple and quick operation; let's see how to proceed in this tutorial. Start by inserti…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos