Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the timing belt of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

In order to replace the timing belt of the Renault Clio, you need to lift the car by loosening the screws that hold the right front wheel: this will then need to be removed along with the corresponding wheel arch. Once these parts have been removed, you can proceed by loosening the tensioner pulley and removing it completely. By doing this, the tension of the belt will be reduced and it will be possible to insert the new one around the corresponding pulleys; at this point, you can reinstall the tensioner pulley to ensure that everything is working properly.

Posted on 31 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio, you need to lift the car with a jack so that the front right wheel can be removed from its h…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos