Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

Today, you will learn how to replace the air filter on a Renault Clio. Start by getting into the vehicle and sitting in the passenger seat. Open the glove compartment and remove it, avoiding the screws on the sides.

After removing the filter cover, take out the filter and then close the vehicle. Next, replace the old filter with a new one, ensuring it is of the same quality.

If the problem persists, it is necessary to visit a garage for a diagnostic check on the vehicle.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to Replace the Air Filter on the Renault Clio 1.5 DCI
How to Replace the Air Filter on the Renault Clio 1.5 DCI
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this brief and simple guide, follow the necessary steps to remove and replace the engine air filter on the Renault Clio 1.5 DCI. First, open the b…
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos