Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster in a Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, see how to replace the instrument cluster in a Renault Clio, a very simple and quick operation. First, ensure that the key is not inserted, then unclip the upper plastic cover by pulling it towards you. Next, remove the two screws that have been exposed using a Torx screwdriver, leverage around the entire perimeter of the cluster with a plastic spatula, and extract it from the housing.

At this point, simply disconnect the internal connector and fit the replacement by following the reverse procedure.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Remove the Instrument Cluster from a Renault Clio
How to Remove the Instrument Cluster from a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today, you will see the main instructions that will allow you to remove and replace the instrument cluster of the Renault Clio dashboard. First, get …
How to Remove the Instrument Cluster of the Renault Clio
How to Remove the Instrument Cluster of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today's guide will show you the procedure to remove and replace the instrument cluster of the Renault Clio. First, get in the vehicle and start by re…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos