|
Do it yourself
| |||
| ||||
How do you remove the front headlight assembly of the Renault Scenic 3?
Model: Renault Scenic
MK III, Scenic 3, Scenic III, MK 3
- Years 2009-2015
The front optical group of your Renault Scenic 3 needs maintenance, such as removing the opacity of the plastics, or total replacement due to breakages related to the plastic just mentioned or the reflector, etc.? Well, this video is perfect for you, as it shows step by step how to do the job: Remove the screws at the bottom of the bumper and those of the wheel arches, then grab the bumper and grille mentioned above and pull them away, not before disconnecting the electrical cable connector. Now all that's left is to unscrew the locking pins of the same optical group, disconnect the socket of the rear power cables and remove it from its seat.
Posted on 10 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Scenic
(2009-2015 /
MK III, Scenic 3, Scenic III, MK 3)
To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of th…
Renault Scenic
(2003-2009 /
MK 2, Scenic 2)
In order to replace the headlight bulb of the Renault Scenic, you will need to open the hood: this way you will be able to access the inner covering …
Renault Scenic
(2009-2015 /
MK III, Scenic 3, Scenic III, MK 3)
To replace the headlight bulb of the Renault Scenic, you will need to open the hood to access the components inside the engine compartment. Once you …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the CV Boot on Fiat Panda
Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |