Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to reset the on-board computer of the Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: -board computer
Operation: How to reset the on-board computer of the Renault Scenic

To carry out this simple and short operation it will be sufficient to follow these simple steps described in the guide and also indicated in the video, then start your car to also start the on-board computer, now using the buttons located on the right control lever of the wipers , then by holding down the keys on the tip of the control lever you can observe that the writings on the display will start to flash to be able to stop and resume their normal operation, now you just have to go back to the main menu and make sure that the maintenance message is disappeared.


Posted on 3 October 2023 by ScegliAuto



How to disassemble the on-board computer on a Renault Scenic
Renault Scenic (1996-2003 / ) How to disassemble the on-board computer on a Renault Scenic? In this video we see how to proceed in the disassembly of the pieces: with a screwdrive
How to reset the service light of the Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In this short and simple guide we will see the procedure that will allow us to reset the service light of the Renault Scenic and Grand Scenic. First
How to reset the TPMS on the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) If we have noticed that the low tire pressure warning light on the dashboard of our car comes on, first of all it is necessary to check the actual in

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the explanation of the warning lights on the Renault Scenic? Read Answer
    • Scenic 2009-2015 - Renault Scenic brake system fault warning light? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos