Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the onboard computer from a Renault Scenic

Model: Renault Scenic - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Onboard computer

See other generations:
Video tutorial

How do you remove the onboard computer from a Renault Scenic? In this video, see how to proceed with disassembling the parts: use a screwdriver to undo the screws located inside the dashboard plastics (at the sides as shown in the video), remove the upper plastics of the dashboard.

Remove the last screws and take out the onboard computer, then, using a thin screwdriver or plastic lever, pry between the onboard computer and its covering, disconnect the various power terminals located at the back.

After removing the onboard computer, fit the new display with all the attached parts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to reset the onboard computer in the Renault Scenic?
How to reset the onboard computer in the Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this tutorial we can see how to reset the onboard computer in the Renault Scenic, an extremely simple and quick operation, to be carried out for e…
How to Reset the Onboard Computer of a Renault Scenic
How to Reset the Onboard Computer of a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To carry out this simple and quick operation, follow these straightforward steps described in the guide and shown in the video. Start your vehicle to…
How to Check the Tyre Pressure on the Renault Scenic
How to Check the Tyre Pressure on the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) The new Renault Scenic model IV constantly monitors tyre pressure. The system alerts the driver if one or more tyres have insufficient pressure or a …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos