Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Engine oil

Saab 9 5 - Engine oil

Saab 9 5 (1997-2010 / MK 1, Ys3e)
Engine oil and filter replacement
Lift the machine with the appropriate jacks and secure it with suitable supports so that it cannot fall. Place a plastic sheet and the oil pan under the …read all…
Posted on 18 July 2023 by ScegliAuto
Saab 9 5 (1997-2010 / MK 1, Ys3e)
Engine oil and oil filter replacement
Raise the car on a lift or on suitable car stands. Place a pan of suitable capacity (about 5 liters) under the oil pan and unscrew the drain plug located in …read all…
Posted on 1 July 2023 by ScegliAuto
Alternator (1) Air conditioning (1) Car stereo (2) Spark plugs (1) Key (1) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Injectors (3) Accessory Kit (2) Third brake light (1) Engine (7) Window motor (2) Starter motor (1) Gear oil (2) Engine oil (2) Door panel (2) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Crankshaft RPM sensor (2) Engine head (1) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos