Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Door trim panel

Saab 9 5 - Door trim panel

Door Trim Panel Saab 9 5 (1997-2010 / ys 3 e, mk 1)

Saab 9 5 (1997-2010 / Ys3e, MK 1)
Removing the Door Panel on Saab 9-3
Replace the panel covering the car door if damaged. Here’s how to remove it. Disconnect the power battery connectors. Using a screwdriver, undo the screws …Read all…
Posted on 10 April 2026 by ScegliAuto
Saab 9 5 (1997-2010 / Ys3e, MK 1)
Removing the Front Door Panel
This video shows how to remove the front door panel. First, remove the screw located just behind the opening lever, followed by the other screws situated …Read all…
Posted on 15 February 2026 by ScegliAuto
Alternator (1) Antenna (1) Air conditioning (1) Car stereo (2) Spark plugs (1) Key (1) Trunk lock (1) Timing belt (1) A/C controls (1) Onboard computer (1) Dashboard (1) Headlight (1) Air filter (1) Cabin air filter (3) Fuel filter (1) Fuel injectors (3) Accessory kit (2) (1) Engine (7) Power window motor (2) Starter motor (1) Transmission fluid (2) Engine oil (2) Door trim panel (2) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (3) Shift knob (1) Fuel pump (1) Instrument cluster (1) Crankshaft position sensor (2) Service warning light (2) Cylinder head (1) Valve (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos