Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Crankshaft RPM sensor

Saab 9 5 - Crankshaft RPM sensor

Saab 9 5 (2010-2012 / Ys3g, MK 2)
How to replace the crankshaft position sensor in the Saab 9-5?
In this tutorial, we can see how to replace the crankshaft position sensor in the Saab 9-5, a very simple and quick operation. First of all, make sure that the …read all…
Posted on 20 September 2023 by ScegliAuto
Saab 9 5 (1997-2010 / MK 1, Ys3e)
Crankshaft rpm sensor replacement
If your Saab engine is having trouble starting when hot, it is probably because of the crankshaft position sensor. The replacement is not particularly …read all…
Posted on 3 July 2023 by ScegliAuto
Alternator (1) Air conditioning (1) Car stereo (2) Spark plugs (1) Key (1) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Injectors (3) Accessory Kit (2) Third brake light (1) Engine (7) Window motor (2) Starter motor (1) Gear oil (2) Engine oil (2) Door panel (2) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Crankshaft RPM sensor (2) Engine head (1) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos