Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Cabin air filter

Saab 9 5 - Cabin air filter

Saab 9 5 (2010-2012 / Ys3g, MK 2)
How to replace the pollen filter on a Saab 9-5 TTiD.
In this video tutorial, we can see how it's possible to replace the pollen filter on a 2011 Saab 9-5 TTiD, following a few simple steps. The first thing to do …read all…
Posted on 23 June 2023 by ScegliAuto
Saab 9 5 (1997-2010 / MK 1, Ys3e)
How to change the cabin air filter
When you go to have your car serviced, it happens that you forget about a very important filter: that of the passenger compartment. It allows to filter the air …read all…
Posted on 21 July 2023 by ScegliAuto
Saab 9 5 (1997-2010 / MK 1, Ys3e)
Cabin air filter replacement
The passenger compartment air filter is positioned behind the central tunnel and in order to access it, it is necessary to carry out the following disassembly …read all…
Posted on 23 June 2023 by ScegliAuto
Alternator (1) Air conditioning (1) Car stereo (2) Spark plugs (1) Key (1) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Injectors (3) Accessory Kit (2) Third brake light (1) Engine (7) Window motor (2) Starter motor (1) Gear oil (2) Engine oil (2) Door panel (2) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Crankshaft RPM sensor (2) Engine head (1) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos