Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Car stereo

Saab 9 5 - Car stereo

Saab 9 5 (1997-2010 / MK 1, Ys3e)
How to disassemble the stereo of a Saab 9 3
How to disassemble the original car radio on a Saab model 9 3 car? Let's see carefully how to do the disassembly. Let's use original or aftermarket metal keys …read all…
Posted on 16 November 2023 by ScegliAuto
Saab 9 5 (1997-2010 / MK 1, Ys3e)
Two methods to disassemble the car stereo
There are two methods to replace the car stereo system: the first involves specific staples, the second a simple screwdriver. The latter method is riskier and …read all…
Posted on 24 July 2023 by ScegliAuto
Alternator (1) Air conditioning (1) Car stereo (2) Spark plugs (1) Key (1) Locking the trunk (1) Timing belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (3) Petrol filter (1) Injectors (3) Accessory Kit (2) Third brake light (1) Engine (7) Window motor (2) Starter motor (1) Gear oil (2) Engine oil (2) Door panel (2) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (3) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (2) Crankshaft RPM sensor (2) Engine head (1) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos