Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Saab
  4. :
  5. 9 5
  6. : Two methods to disassemble the car stereo

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Car stereo
Operation: Two methods to disassemble the car stereo

There are two methods to replace the car stereo system: the first involves specific staples, the second a simple screwdriver. The latter method is riskier and could ruin the plastic edges in which the system is housed. First method: insert the two clips into the appropriate holes, then pull to disassemble the lower part of the car radio. This will give access to a hole to facilitate removal of the top of the system, the information display. Using the hole, pull this part to completely remove each component of the car radio. Second method: insert the screwdriver by levering in the upper right part of the information panel, then push to make sure that the lever disassembles the component directly, without necessarily having to disassemble the piece below. In both methods, attention must be paid to the wiring that are located in the hidden part of the car radio, as they are essential for both power supply and transmission of information to the car speakers.


Posted on 24 July 2023 by ScegliAuto

This video is currently unavailable


How to disassemble the stereo of a Saab 9 3
Saab 9 5 (1997-2010 / MK 1, Ys3e) How to disassemble the original car radio on a Saab model 9 3 car? Let's see carefully how to do the disassembly. Let's use original or aftermarket m
Installing the emulation device of a CD player
Saab 9 5 (1997-2010 / MK 1, Ys3e) Sometimes, it may happen that a radio does not also include the CD player, especially the older ones, or that the mounted player does not read one of
How to remove the LPG injectors from the Saab 9-5.
Saab 9 5 (1997-2010 / MK 1, Ys3e) Let's see in this guide the main steps that will allow us to disassemble and replace the LPG injectors of the Saab 9-5. First of all, we open the eng

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos