Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna of the Saab 9-5

Model: Saab 9 5 MK 2, Ys3g - Years 2010-2012
Part: Antenna

The steps to replace the roof antenna of a Saab 9-5 car are simple and quick to perform independently. The first step is to check that no water has entered the antenna wire circuit, and to do this we must remove the roof covers. If there are no water leaks, we can move on to the second step. The second step is to unscrew the antenna from the roof and replace it with the new antenna. If necessary, you will need to replace the gasket. The third step is to reassemble the roof covers.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Stereo from a Saab 9-3
How to Remove the Stereo from a Saab 9-3
Saab 9 5 (1997-2010 / Ys3e, MK 1) How to remove the original radio from a Saab 9-3? Pay close attention to how to carry out the disassembly. Use original or aftermarket metal keys to …
How to Replace the Starter Motor in a Saab 9 5
How to Replace the Starter Motor in a Saab 9 5
Saab 9 5 (1997-2010 / Ys3e, MK 1) To replace the starter motor in a Saab 9 5, open the bonnet and access the components underneath, as the starter motor is located at the front of the…
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
Saab 9 5 (2010-2012 / MK 2, Ys3g) In this tutorial, see how to replace the crankshaft position sensor on a Saab 9-5, a very simple and quick operation. First, ensure the engine is com…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos