Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Antenna on Saab 9-3

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Antenna

Replace the non-functioning antenna on a Saab 9-3. Use a screwdriver to pry between the securing clips and the headlining (without damaging the headlining), and remove the clips from the panel. Open the roof panel to access the antenna. Undo the securing screws of the antenna mount (located between the metal and the mount). Install the new antenna mount on the roof of the vehicle (tighten the screw with the screwdriver until fully secured). Test the correct operation of the antenna. If you want to install a larger antenna, you can integrate the old antenna as shown in the video.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Electric Aerial
Replacement of Electric Aerial
Saab 9 3 (2002-2014 / MK 2) Completely unscrew the aerial fixing nut and remove the damaged part still inside along with the toothed cord: pay attention to the position of the t…
Replacing the Starter Motor on a Saab 9-3
Replacing the Starter Motor on a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Today's guide will show you the steps to remove and replace the starter motor on a Saab 9-3. First, raise the front of the vehicle and disconnect the…
How to Remove the Radio from a SAAB 9-3
How to Remove the Radio from a SAAB 9-3
Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos