Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Battery Replacement

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Battery

The battery is located at the front right of the engine bay (when viewed from the front); therefore, remove the plastic cover and unscrew the fastening bolt of the battery retaining bracket located at the bottom of the battery tray. Disconnect the terminals and remove the battery from its housing. Insert the new battery, ensuring the terminals are correctly oriented and checking the correct amperage and cranking capacity. Connect the terminals, reposition the retaining bracket, and tighten the bolt. Finally, replace the plastic cover.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Injector Battery Replacement
Injector Battery Replacement
Saab 9 3 (2002-2014 / MK 2) Open the front bonnet and ensure it is securely supported. Before proceeding with the repair, disconnect the negative terminal of the battery to avoi…
Replacing Remote Key Battery
Replacing Remote Key Battery
Saab 9 3 (2002-2014 / MK 2) To replace the battery in the remote key, first locate the hole on the side edge of the key: insert a small screwdriver into the hole and press to re…
Replacing the Front Headlight Bulb
Replacing the Front Headlight Bulb
Saab 9 3 (2002-2014 / MK 2) To easily access the rear of the headlight, first remove the plastic cover of the battery, the windscreen washer reservoir (simply pull it upwards), …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos