Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace rear light bulbs on Saab 9-3 MK2

Model: Saab Saab Various
Part: Tail light bulb

In today's video we will see how to remove and replace the rear light bulbs on a Saab 9-3, second series. First we open the boot lid and start by removing the side carpet coverings; then we remove the tailgate panel, removing the plastic clips, as shown in the video. At this point we can remove the lamp holder to access the bulbs, in order to replace them; unscrew the three screws of the headlight, using a 10 mm socket wrench, to remove it from the outside, disconnecting the electrical connector. Finally reassemble everything!

Posted on 3 June 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the air vents on the Saab 9-3
Disassembly of the air vents on the Saab 9-3
Saab Saab Various In this video tutorial we will see how to remove and replace the central air vents of the Saab 9-3, in simple and quick steps. First of all, let's ge…
How to replace the clutch pedal spring on the Saab 9-3.
How to replace the clutch pedal spring on the Saab 9-3.
Saab Saab Various In this short and simple guide, we will see how to disassemble and replace the clutch pedal return spring of the Saab 9-3. First, we get into the car…
Guide for removing the fender / side strips on the Saab 9-3 MK2
Guide for removing the fender / side strips on the Saab 9-3 MK2
Saab Saab Various In this short guide we will discover the steps that will allow us to remove the side fenders or the fascias on the second series Saab 9-3. First we o…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos